How to Fix Error Code 0xc00000f Windows 10?

Fix Error Code 0xc00000f Windows 10:

Error code 0xc00000f windows 10 is a Boot Configuration Data (BCD) issue. The error screen will display an array of suggestions to fix the issue.

We have discussed a few of such methods to fix error code 0xc00000f windows 10 and rebuild the Boot Configuration Data by creating EFI system partition.

Unplug the USB or Other Devices Connected to a Computer

The USB inserted in your computer device or laptop ports may cause issues at times. Therefore, remove the USB or cables and reboot your computer system and check if it is fixed.

Check the Hard Drive

Before proceeding, make sure your hardware doesn’t create a problem for you. So run the chkdsk tool, and first, check your hard drive.

• Firstly, insert your CD / DVD installation into the drive and turn your computer system on. Next, choose Repair from the bottom part of your computer after setting the appropriate language, keyboard, etc.
• Single the installation drive for Windows, which is commonly C:\, and then click on Next.
• Lastly, start the Command Prompt after the System Recovery Options screen appears. Type and execute the following command by pressing Enter- chkdsk C: /f

Once the process is completed, check if it helped to fix error code 0xc00000f windows 10.

Repair Your Computer from Setup Wizard

By using Repair your computer works for repairing the error code 0xc00000f several times in Windows 10. To perform this, ensure that you have a legitimate Bootable media in either USB, Flash Drive, or CD / DVD.

• Start with Inserting the CD / DVD and choose the Language from the respective dropdowns to install, time and currency format, and keyboard input method, after that press Next.
• Select from the Setup wizard to repair your computer. Allow the tool to fix the problem, and check the error is fixed or not.

Repair Your Computer System

It will be better if you get a bootable CD / DVD / Pen Drive / USB and if not available, then you will have to create one using the following steps below–

• Place the installation media with USB / pen / Drive DVD / CD into the port or optical DVD drive.
• Reboot your computer device and press the F2 button (The key varies from computer to computer, on some other systems you have to press F3 or F4, or Esc or Del). Once you get the BIOS screen, click on the Correct Boot Order.
• Set your USB / pen / Drive DVD / CD name in the 1st Boot Device row.
• lastly, Press the F10 button to save your settings and then restart your computer. Hopefully, now it will restart in Windows 10 with the installation media and repair Error Code 0xc00000f.

Rebuild Boot Configuration Data

The tool bootrec.exe is already inbuilt in Windows which is utilized in reconstructing BCD. once you built it or locate it in Windows, the boot configuration data successfully manages the start-up procedure.

• With Windows installation, re-type the genuine bootable CD / DVD / Pen Drive / USB and start your computer. Once a key is asked by the screen, press it to continue the booting process.
• Next, select language, keyboard, time, currency, and more. Click on Next. 
• Click on the operating system that you need to repair and then the Next button. Now you will reach recovery mode. Next click on the Prompt Command.
• You will find the black panel in this step. Enter bootrec.exe and press Enter. This will rebuild the configuration data for the boot and return your computer to normal condition.
• If this method doesn’t work, delete the old BCD and rebuild it again.

For That, Run the Following Commands One by One –

bcdedit /export C:\BCD_Backup

c:

cd boot

attrib bcd –s –h –r

ren c:\boot\bcd bcd.old

booties /RebuildBcd

Once all the above commands execute, the issue might fix.

Repair Boot Configuration Data

With the help of this step, you will find the data file for boot configuration and its parent partition. It will also allow you to repair the BCD file, or create a new one from scratch. Windows10 installation media will be required on a USB / Pen / Flash drive which is a formatted one with a FAT32 filesystem.

Create an EFI Partition

If this is not available in your PC, you can create a new one using a Windows install media and free disk space of at least 200 MBs. Here is how you can do it.

For this, you need to go back to method 3 to create a Windows 10 install media and boot from a USB, and then have access to the Command Prompt black panel.

Lastly, you will have to restart your computer system and check if the issue is fixed. We hope the above article helped you to fix the error code 0xc00000f windows 10.