How to Fix Roku TV Antenna Channels Missing Issue?

If you discover that your Roku TV antenna channels are missing, don't worry—you're not the only one! You and many other Roku TV users are having the same problem.

In today's article, we'll show you step-by-step how to resolve this issue. Additionally, we'll show you how to add antenna channels on Roku TV and provide advice on how to reach the hidden Roku antenna window.

Reset your Roku TV to restore the lost over-the-air (OTA) and antenna channels. Go to Settings > Power to accomplish this. Look to seek Restart or System Restart from that. Do a rescan of your channels then after.

Why Did the Channels on My TV Antenna Disappear?

There are a variety of causes why some of the TV antenna channels you receive occasionally vanish and get misplaced.

The following are some of the most typical explanations for why your Roku TV Antenna Channels Missing Issue to receive certain channels:

Greater Length Than Typical Coaxial Cables

People are unaware of this data, thus they do not actually perceive it as an issue. However, there has been numerous complaints pointing the finger to long coaxial cables as the cause of the lost feeds.

You may lose roughly 30% of the signals or channels you are receiving if your coaxial wire is longer than 100 feet.

Therefore, ensure that your coax wire is shorter than 100 feet.

Poor Antenna Positioning

Whenever your antenna doesn't have direct sight to the tower, this is an additional factor—and it's one of the most frequent ones.

Towers, trees, buildings, cement, scaffolding, and other objects might be obstructing it. More so, it can also be because it's not oriented in the right way.

Here are some suggestions to keep in mind if you belong to the group of people who are unable to do this check:

The majority of damages were physical. Check your antenna to see if any parts or pieces are damaged.

Check cables, wires, including cords to make sure it's all properly plugged in or to look for any broken wires and cables.

By connecting the connector to a different television, you can determine if a broken antenna is the correct one.

How to Solve the Roku TV Antenna Problems with Missing Channels

You must take the following actions in order to resolve this particular problem:

First step: start up your Roku TV

The first thing you need to do is make absolutely sure your Roku TV is switched on again and enabled since if it's off, you won't be able to correct it.

Step 2: Restart or reset your Roku device

The next thing you need to do is to reset or reboot the Roku TV after trying to make sure it is switched on.

You should now go to your Roku TV's Home panel and select Settings from menu on the left. You would like to access the system settings under settings, so select System > Power.

Step 3: Rerun the Channel Scan

Rescanning the channels is what you want to do after getting the system up and running once more. Use your remote's star [*] button to accomplish this.

Scan for Channels could be found by scrolling up, then clicking [OK].

Unless you already have cable or even an antenna, a prompt should inform you that the system will search for channels that are all now accessible.

You only need to select the Start Finding Channels choice from there. So you must select No, Channels 3 and 4 are not required. It will then inform you of the complete list of channels discovered at the conclusion of the guided prompts.


Several of you believed that all these lost channels would've been lost forever, however, they are actually very simple to restore! Don't freak out the next time you see some Roku TV Antenna Channels Missing Issues! Simply refer to this manual once more for a long-lasting solution to your current issue!

  • Mick Jone
  • Category: How-to
  • Last Update: 5 months ago