Thanks for sharing your vote !
Have a minute to tell us and other readers how this question helped you? We feature review like yours in our Recommended Review section.
Please let me know how to fix NTLDR is missing errors in Windows. I have no idea about this. Help me.
The most typical "NTLDR is missing" error is just one of many potential causes for NTLDR errors. The most frequent cause is that you're attempting to boot your computer from an external hard drive or portable device that isn't set up to do so.
It's attempting to boot using a non-bootable source, in other words. This would also apply to media that you're endeavoring to boot from on a diskette or floppy drive.
Other potential causes include damaged or lose IDE cables, corrupt hard drive sectors, outdated BIOS, corrupt and incorrectly configured files, problems with upgrading the hard drive and operating system, and corrupt and misconfigured files.
To start, try choosing the simplest solutions by following the directions in the correct sequence they are listed below.
Step 1: First, restart your computer. The mistake might have been an isolated incident.
Step 2: Remove any external drives and check your CD/DVD/BD and floppy drives for media. When trying to boot from an unbootable floppy disc, CD/DVD/BD, exterior hard drive, or appear drive, your computer will frequently display the "NTLDR is lacking" error.
Step 3: Verify the BIOS settings for the hard drive as well as additional drives to make sure they are accurate. A drive's usage is dictated by the BIOS configuration, so improper settings may result in issues like these errors.
The primary directory of the main hard drive should contain the two files listed below. In the illustration below, we have copied these files onto the CD-ROM drive email, which for this case is "e." If you are using a computer, this letter might look different.
Make sure the new hard drive is an unfilled drive if you're trying to add it to the computer. The NTLDR error might appear if a computer with Windows already installed adds an additional hard drive to it. To format the freshly installed hard drive, if you aren't sure if the newly installed drive is empty, try starting your computer from a bootable diskette.
Make sure the new hard drive is an unfilled drive if you're trying to add it to the computer. The NTLDR error might appear if a computer with Windows already installed adds an additional hard drive to it. To format the freshly installed hard drive, if you aren't sure if the newly installed drive is empty, try starting your computer from a bootable diskette.
If all of the aforementioned solutions work to fix the problem, it's likely that the hard drive needs to be supplanted because it is damaged. To see if it fixes the problem, you can try setting up a fresh drive as well as installing Windows on it.